product-image

PKP-2400-SI

PKP-2400-SI is a compact keypad based on CAN protocol. It comes equipped with eight keys with interchangeable 15 mm inserts. The keypad is water and dust resistant, and can be installed both inside and outside the cockpit. RGB led lights and the ease with which icons can be switched in and out make it possible for the user to customize each key in a wide range of variations.

SHOP NOW
DOWNLOAD DATASHEET

First introduction to the PKP Series Keypad?

Here is a short product overview video.

SOFTWARE FEATURES

CAN and RS485 Keypad Addresses

Assign any valid CAN and RS485 address to the keypad. Communicate on either BUS simultaneously.

J1939 Address Claim Transmission

Keypads no longer have to be pre-programmed to a specific address. This enables customers that work in applications in the field without access to a GUI to use any replacement keypad on-hand. The keypad can be configured to automatically announce its address and accept a new address assignment as appropriate.

Event Status Transmission

The keypad can send messages to the BUS indicating a button press or a button release event has occurred. This confirmation allows digital systems to have the same input acknowledgements as that of the latching position of a mechanical switch.

Periodic Status Transmission

The keypad sends a continuous broadcast of messages indicating the press or release status of each button at that instance. The frequency of these messages can be adjusted in a wide range.

Online Set-up

An online set-up system makes it possible to select and  design your own prototype, then order it directly on blinkmarine.com.

Periodic Heartbeat

The keypad sends a continuous broadcast of  messages indicating it is functioning correctly. The frequency of  these messages can be adjusted in a wide range.

CANopen Communications Protocol

Fully compliant with Device Profile 401d.

STANDARD FEATURES

  • Reconfigurable keys

  • Relegendable buttons

  • LED state & status configurable

  • Vertical or horizontal mount

  • LED backlit icons

  • Multicolor indicator rings

  • Laser etched icons

  • ON/OFF, momentary, toggle & scroll

  • Hundreds of stock icons to choose from

SOFTWARE FEATURES

  • Change CAN or RS485 keypad addresses independently

  • Periodic status transmission

  • Heartbeat

  • Event status transmission

  • LED acknowledgement

  • Address claim transmission

  • RS485, CANopen and J1939

OTHER BENEFITS

  • Programmer’s manual available to help support plug-and-play reconfigurability

SPECIFICATIONS FOR STANDARD KEYPADS

ELECTRICAL

Supply Voltage 12-24Vdc Nominal (8-32VDC)
Standby Current <50 mA
Communication BUS RS485, CANopen, J1939
MTBF 238506 hours (in accordance with MIL-HDBK-217 – operating environment Ground Mobile)

MECHANICAL

Connector Deutsch DT04-4P
Switch Life 3 million operations
Mounting Studs #10-32 CDA-510 phosphor bronze, electroplated bright tin
Keypad Silicone rubber with polyurethane hardcoat
PC Board 1,6mm thick, Nema Grade FR-4, double clad with 1oz copper
Operating Temperature -40°C to +70°C
Storage Temperature -40°C to +85°C
Thermal Shock -40°C to +85°C According to table 2 of ISO16750-4
UV Protection UVB 400 hours
Salt Spray Per ASTMB117
Chemical Resistance Deet, Engine Cleaner, Isopropyl Alcohol,
Suntan Lotion, Multi-Purpose Cleaner,
Orange Citrus Cleaner, Muriatic Acid
Ingress protection Rating IP67/IP69K
Weight 170 gr (Inserts excluded)

 

Technical schemes